Showing posts with label Jeep. Show all posts
Showing posts with label Jeep. Show all posts

Thursday, 12 February 2026

Day of Days

 

Band of Brothers. That epic mini-series really captured my attention, and from the start I wanted to create a scene that portrayed the feel of the show.

The title of this piece, and one of the episodes, revolves around the final preparations for the parachute drop on D-Day. The scene in that episode that really struck me involves the paratroopers preparing their equipment on the airfield, with Lt. Winters helping everyone up to board the aircraft.

So, the scene is simple. It involves a couple of paratroopers making their final equipment checks with an officer coming to see them off. They look sykyward; maybe in anticipation, or maybe they are watching the first wave take off.





The Jeep is the Tamiya kit with a few added missing details and the steering turned slightly. I added the Mantis Miniatures jeep stowage set, which includes a folded canvas roof and some baseball equipment to put in the back, as well as some other items of equipment.



Painting was pretty straightforward as I wanted the jeep to show minimal wear; I assumed it would be fairly new, after all. Restraining the weathering was harder than it looked as there is a tendancy for it to look toy-like. Just some subtle modulation and a light dust layer did the trick.



The two figures on the airfield are both from Minisoldiers, and all of the equipment strewn around comes with the bending figure. The officer is a Soga Miniatures figure and it, along with the standing figure, had their heads modified to look up.


I read somewhere that paratroopers would lay out all of their equipment on a blanket whilst gearing up. That way they would immediately see that they had everything once the blanket was clear. I rolled out some putty for the blankets and pressed down all of the equipment into it.





As you would expect, painting of this equipment takes some time. Painting this, and the Airborne uniform is explained in more detail in previous blog post, here.

One item I hadn't tackled before was the inflatable "Mae West". Painting yellow is always a tricky affair but the key is to use a flesh undercoat before the yellow goes on. This really helps maintain the vibrancy of the colour, without it becoming washed out.

Another thing to consider is the shade colour. The opposite complimentary tone for yellow on a colour wheel is violet. Now this may sound odd, but used sparingly, this really does work. As always, I tried this out on a spare torso before committing to the figures.

This is the palette I finally used for the yellow.



Yellow Mae West Life Preserver:

Undercoat:        AK Gen3 11403 Highlight Flesh

Base Colour:     Mix AK Gen3 11042 Volcanic Yellow with a touch of 11078       Medium Orange

Shadow:            add AK Gen3 11406 Reddish Black (Sparingly !)

Highlight 1:        add more AK Gen3 11042 Volcanic Yellow

Highlight 2:        add AK Gen3 11041 Golden Yellow

Final highlight and edging was done with 11036 Ice Yellow, and the midtones were then glazed sparingly with 11078 Medium Orange




Finally, I was honoured to receive the D-Day theme award for this piece at the KMK Scaleworld show in Belgium.



Thursday, 26 May 2022

SAS Jeeps. (Now it's finished)

 

Finally.

Got the camera out and took some decent pictures.






















In-depth article coming soon...







Wednesday, 11 May 2022

SAS Project complete (almost)

 

Almost.

With the exception of a few finishing touches, I'm calling this one done. Finally !

More detailed photo's to come when I break out the camera gear but in the meantime, here are a few shots taken with my phone.






Thursday, 28 April 2022

Go Figure

 

A word about the figures.

The figures I have used here are from two sets by Russian manufacturer, Soga Miniatures; sets 3567 & 3569. I have swapped the heads around and replaced a couple of them with heads from Hornet and Mantis just to mix things up a little. Images from their boxart below:





I found this really useful image on the internet of an SAS officer and this was the template for the paint scheme on the figures. I guess only the SAS can rock the socks and sandals look.




So this is where I ended up. This is the standing .50 cal gunner but the other three are painted pretty much the same.




Flesh:

Base colour:        Vallejo 876 Brown Sand

Shadow:            add Vallejo 859 Black Red

Highlights:        add Vallejo 815 Basic Skintone

Beard / Hair:

Base colour:        AK Gen3 11111 Burnt Umber

Shadow:            add AK Gen3 11029 Black

Highlights:        add AK Gen3 11009 Warm Grey

Shirt:

Base colour:        Lifecolor UA442 British Uniform Yellow Tone Gears

Shadow1:            add Vallejo 873 Field Drab

Shadow2:            add AK Gen3 11111 Burnt Umber into Shadow 1

Highlights:        add Vallejo 976 Buff

Shorts:

Base colour:        50% AK Gen3 11436 Canvas & 50% AK 3072 Green Ochre

Shadow:            add AK Gen3 11111 Burnt Umber

Highlight1:        add more AK 3072 Green Ochre

Highlight2:        add Vallejo 986 Deck Tan into Highlight 1

Webbing:

Base colour:       Vallejo 886 Green Grey

Shadow:            add AK Gen3 11111 Burnt Umber

Highlights:         add AK Gen3 11009 Warm Grey

Socks:

Base colour:       Vallejo 872 Chocolate Brown

Shadow:            add AK Gen3 11029 Black

Highlights:         add Vallejo 819 Iraqi Sand

Sandals:

Base colour:      50% Vallejo 872 Chocolate Brown & 50% 875 Beige Brown

Shadow1:            add more 872 Chocolate Brown

Shadow2:            add  AK Gen3 11029 Black into Shadow 1

Highlights:         add more Vallejo 875 Beige Brown

Scuffs and scratches:        Vallejo 819 Iraqi Sand

Final Glaze:    Thinned Scalecolor Chestnut Ink to mid-tones only

Tuesday, 25 January 2022

A little more SAS jeep progress

 

More Progress !






Slow going at the moment but jeep No.1 is about ready and I'm making some progress on painting the stowage of jeep No.2. The subsequent dust layers will tone all of this down somewhat and blend everything together.


Anyway, some teaser shots just to prove I'm still working !






Thursday, 4 November 2021

Chippety, chip, chip.

 

Progress !



I've begun the oh so tedious task of chipping. Well, one of the jeeps anyway, but it's a start.

Certainly not a quick process and one that is best accomplished over several sessions.

It is always difficult to judge the effect, especially on a light surface, but I imagine these jeeps would have looked slightly the worse for wear.

Process here is an initial round of sponge chips using a lighter version of the base colour; in this case ModelAir 075 Sand. Once this is complete the centre of some of the chips is filled in with 941 Burnt Umber. For the deeper chipping I used 822 German Camo Black Brown.

As you can see, the effect looks quite harsh here but we have to bear in mind that this before the pin wash and the whole thing will get toned down with the dust layers later on.





That's it for a while, still a lot of this nonsense to do yet.

Until the next time.